Hi everyone don't know if this has been mentioned before but what about a project bike section be ace to see what everyones up to on there bikes always makes great reading and pictures to look at could always use photobucket to show the pictures o
Can anyone tell me if pilot jet sizes are the same for the mk2a with black plastic air box and previous models with the pancake air filter?
Hi all, I tried in the past to fit a sat nav to my commando, trashed it!! Is it possible to fit a negative earth sat nav to a commando, if so has anyone got an idiots guide on how to do it please, cheers Tone.
I have just ordered several parts including a Podtronics Regulator and the solid state Rectifier. Will these parts come with a wiring diagram?I presume I can bin the old Zenners and black finrectifier.
1972 Interstate (ex Interpol). Starts and ticks over very nicely. Last year developed a fault as described (backfiring, cutting out completely). Traced to what I thought was a bad connection on the electronic ignition, under the inspection cover.
Am having the fuel tank resprayed, could anybody please give an indication of the paint code/colour/reference? It's a model 50/350 1957. Please see pic. Many thanks. Dave
I have been attempting to post a for sale add on the website and seemto be getting nowhere, after I had typed out all the details I was-faced with two options cancel or save, obviously save was the only way to go but my add has not appeared,where
Hi all, Canada calling. I have a 1956 Dominator 99 and need to repoalce the speedo gear box. I have checked the Norvil site and they list two types, 1 is a 2 -1 and the opther is 1.25 - 1.
Good morning EC,
I notice that Chris has closed a previous thread regarding the club's POSSIBLE involvement into commercial activities. He did kindly provide a link to an abbreviated report on the AGM.
After having been a confirmed Triumph rider for the last 43 years, I have taken the leap and purchased my first Norton. A 1965 Atlas presented itself for sale last summer and I just had to have it.
I recently bought a plain steel rear mudguard form Royal Crusaders who avertise on e-bay. It arrived last Friday and as there has been a lot of discussion with regard to quality and fitting I thought I would relate my experience.
Hi Guys,My beautiful 850 roadster has come out of its chrysalis (read shed) today.
1953 big 4 is there a exhaust gasket/sealer or is it a push fit into head ?
getting a backfire from exhaust
As mentioned in other threads I have got my ES2 up and running and done about 300 miles on it with no derious problems so far. The main issue that I want to overcome at the moment is the oil leak from the rocker box.
hi everyone just been offered a 1969 750 and spotted this on one side of the engine any ideas what would cause it top end ? bottom end?
Hi All
Anybody got any input or experience with twin pull throttle I had one many years ago and went backto the standard single into two via a junction box.
Hi all, I recently bought a new (used) timing side engine casing of ebay. The pressure relief valve arrange is different to my current case.
hey everyone just wondering if there are any other 20-30 ish year olds in the north25 myself 
today
I'm in cheshire near the cat and fiddle
Does anyone have any tips on how to press in replacement bushes into rear shock absobers please.
Please can any of you helpful members assist with identification and recommendations. A friend has recently acquired an ES2 in a rigid frame (see attached). The engine numbers on the drive side crankcase are 59799 K4.
Hi all, just aquired a 55 19s with a 51 18 engine in it. Much missing but ive stripped the engine and the end is shot.Anyone changed an end. Ive done my bsa m21 but that has tapered ends so is easier to fit. I believe the norton is parallel.
In May 2014 it will be exactly two years that I bought my new 961 CafÃ? Racer from the Swiss distributor Egli Motorrad Technik AG in Bettwil, Switzerland (EMT) www.egli-racing.ch.
|
NOC
|
NEWS
|
INFO
|
|
|
