All Forum Posts

I fitted a Steve Maney belt drive to my Commando nearly twelve years ago, and an Alton starter kit three years ago.

Thinking in advance, and looked around.

I am in the process of building aTriton, getting nearer to the end than the beginning. I have a 1957 featherbed wideline frame, number available, as dated by Dave at twin records.

has for login in problems connected to direct debits well I renewed my membership back in JUNE so you meen to say this problem has been with us for this length of time Question? Is the Noc web team on the job or asleep ? Q???

Hi, I recently bought a 1952 model 7 500cc project, bike is almost complete and I can buy most of remaining bits. Unfortunately it only has one plunger arrangement on drive side.

Hello All,

Hello All,

I have found the awful noise but now have to tension the kickstart spring. Am I right to think that the inner gear housing has to come off to do this?

Just by way of an update and for the benefit of others I've been trying to stop my jubilee impersonating the Torre Canyon (google it if you need to!) while seriously thinking about it setting fireto it that probably isn't the best solution!

Afternoon all, Not sure if this is possible but before registering a 'trace' on the original factory records through the Club does anyone know if it is possible to trace the dealer to whom my bike was dispatched in 1959 from those records.

This damn machine is a nightmare!

Many thanks to al those who have previously posted advice to me on this subject. I've taken it on board and progressed with the installation of the new stator and rotor, but I still have issues.........

High everybody I am slowly building my ''self assembly'' jubilee and was wondering has anyone tried to improve the performance of the engine,nothing complicated just gasflowing,raising the comp ratio, making some parts lighter, etc.Also the resent

Please can i ask for some advise with a worry i have come across whilst recomissioning my long laid up Commando 750 in a slimline frame.

My dynamo charing system isn't.

Hello All,

Hi all,

Hi all, I have a 1973 mk1 850, I have removed the rear chain oiler that is fed from a branch on the return pipe to the oil tank.

I am looking for a well sorted Dommi 99. Looked at one today. Although documentation is sketchy it appears to have only done 17500miles since 1958. Strangely it seems to have had a major engine rebuild when it was only three years old !

I took a photo of the wiring before stripping it out during my latest restoration project and my phone has managed to lose the photo.

I have been using Morris' classic Golden Film 20/50 in the Navigator's gearbox as recommended by the Norton maintenance manual but a little concerned about how it does tend to whine more than I remember back in the 70s and after a run the oil has

Rebuilding a domi 88. Renewed bearings, felt seals etc. When I clamp up the spindle Nut, the wheel is locked.

Hi All

I have just completed a full engine rebuild but am having problems finding the cause of white smoke coming from the right hand exhaust, the left hand has not such problems.

My 2013 Sport needed a new battery when I bought it recently.

My Alton starter has stripped the teeth for the gear driven by the electric motor which then drives the shaft with the nylon shear pins an chain.

Hello,

i am working on my 1946 Model 18 with a rigid frame and dollâs head gearbox. I have looked everywhere and not been able to find the specifications for the correct play in the drive chain. Any advice would be appreciated.

Just fitted a RK GP530UWV sealed rear chain to my Mk2 and it fits and runs without rubbing. Same width as a DID 530 NZ at 22,6 mm. We'll see how long she lasts.

Bike is 1959 Model 50. I currently have the chain case off addressing problems with the alternator - ref. earlier messages. While I've been doing this I've noticed oil leaking out of a breather tube.

My subscriptions coming up for renewal and I am afraid, as I pressured this next year, my money will go to the VJMC.

Afternoon folks,

Does any body have the Height, width and depth measurements of a Lucas PUZ7E/11 battery?

Many thanks,

Mick

Just found a number hard stamped on the back of the crankcase: 99 4280. The 99 seems self explanatory but can anyone tell me what the 4280 represents.

Attachments
image-jpeg