All Forum Posts

Is the website working properly re contacting of officers? We can find no e-mail contacts connected to the contact names, nor any means of doing so?

I have a 1961 Dommi 99. I took the bike out yesterday, after about 5 miles there was a bit of a miss. I turned for home and it got worse -felt like going on and off a cylinder. I took off the carb but no dirt and petrol flowing ok.

Hi chaps - I'm tearing my hair out with this problem:-

I am new to the Norton (though I've been a long-term fan of british bikes in general and the Norton marque specifically) and I have set myself a (very) long term goal of owning/restoring a Commando Hi Rider. What can I say?

Hi i have recently removed the engine from my 16H, its having a bit of a 8000 mile birthday. Seems it had broke the piston rings, there was also 15 thou crank end float but thats another story.

Norton Commando 850 sidecar combination.

I have a Watsonian GP Jubilee Classic sidecar and thinking of havingit attatched to my Commando.

Is the bike up to it? Is the frame to weak? Do I need a subframe.

Hi,

I wondered if anybody has a solution to a problem I have come across in attempting to replace the layshaft bearing within the main body of the gearbox.

Hi

Can anyone out there recommend a touring screen for a mark IIA commando (flattish bars). Does anyone know if the two MRA vario screens on the following site are any good?

Hi,

Are the wheels of the drum braked 750 identical to the wheels of the 850mk2. Also are fast back and Interstate wheels the same?

Thanks

Mark

Hi

Can you add another column that shows the town or county of suppliers. This would be helpful as members will be able to immediately identify the closest supplier to them

Thanks

This Section was born out of the view that for many of us riding Norton motorcycles was our reason for joining the Club. So, now it exists: what are we going to do?

Hi,

Hi .

I've just joined the Norton Owners Club and just acquired a 1959 Dominator in original intact but rusty and seized condition .

I'm new to Nortons but am thinking of buy a 1975 850 Commando MkIII from a dealer in California. The bike looks sorted and I have asked for an independent assessment.

Hi,

I'm new to Nortons but am thinking of buy a 1975 850 Commando MkIII from a dealer in California. The bike looks sorted and I have asked for an independent assessment.

I've just rebuilt the rear master cylinder on my 1975 MKIII and fitted a Grimeca caliper and stainless hose. I'm sure I've put all of the seals in the right way but when I put brake fluid in the reservoir it just stays there.

Hello

Please can someone advise on a good source of clutch friction plates and clutch basket friction pads (Qty 18) for a '59 99. Norvil have none on stock.

Thanks

Pompey Graham

Dave Broadbent, in a letter in the March/April 2010 Roadholder Magazine (page 27), makes reference to a method suggested by Nigel Clark of keeping the chaincase leak proof.

please advise oil to use in engine c/case g/box kevin thanks

I've been riding my Norvil Commando for years(20K miles) during which timewith various improvements tothe front endI have achievedsuccessive improvements in handling and pointability to my ever increasing enjoyment.The bike has just passed its MOT

Hi All, am I better off buying parts through NOC or are they same price as M.Hemmings etc?

Thanks, Paul.

Hello,

New French member, Nortoniste since 1968, I had a Dominator 88,99,650 SS,then MK2,MK4 (the best) commando and for 20 years one 850 MK3.

Thought I had dealt with just about everything rebuilding my ES2, having sorted out the excessive oil burning etc, I received the tanks back from being painted and lined evrything was looking as it should for the Easter break.

I've just acquired a 1960 Jubilee De Luxe in large bits with a view to restoring it. it has a couple missing; namely the chainguard and correct front mudguard; the one on there is from a later Jubilee, I think.

Hi, I am looking for parts and info to fit the above -

Parts : the fittings around the foot rests - I can get the bits made if I have a pattern.

Info : how to fit the headlamp into the fairing?

Cheers

Would any body with information or details on construction of a NorImp please e-mail John Hall

Hello all,

I have a question that I can't find a definitive answer for so I'm hoping you'll be able to help.

Cognoscentiof the Norton Commando Mark 3 will get a rare opportunity to buy a brand 'new' and unused Mark 3 Commando when 11 unopened crated bikes are auctioned on April 26.