Skip to main content
English French German Italian Spanish

rotor bearing circlips

Forums

Hi,

my engines nearly ready for rebuild, just need to obtain 'rotor bearing circlips', does anybody know if these are specials or would stock circlips do, they need a small amount of 'thinning down 'as they stock items are 2mm and Norton items are 1.7mm thick The stock items are about 80p each, Andover Nortons items are £15+ each !

Permalink

Hi Robert, I recall that when I rebuilt my IP2 the recommendation was to fit new circlips. I think I could only obtain 2. I would try and track down Richard Negus for his opinion.

Permalink

Previously david_evans wrote:

Hi Robert, I recall that when I rebuilt my IP2 the recommendation was to fit new circlips. I think I could only obtain 2. I would try and track down Richard Negus for his opinion.

Thanks Dave

I, ve emailed the rotary club twice and got no reply, if someone knows Richards or Brian Crichton email address, s please let me know or pass on my query.

Thanks

 


Norton Owners Club Website by White-Hot Design