Listings
-
-
1935' Works Front Hub & Brake PlateWanted - - September 23, 2022Wanted... 1935 or 1936 Works Front Hub And Brake Plate. Must be one lying about somewhere...
-
jubileeWanted - Leeds (west yorks) - September 18, 2022wanted for jubilee seat or base old or rusty also tool/battery box lid
-
Commando MK111 side panels wantedWanted - SOUTHWATER (WEST SUSSEX) - September 13, 2022
A pair of commando MK3 side panels wanted,can exchange for a pair of mk2 side panels
-
1948 ES2 timing side crankcase or even better matched pairWanted - REDRUTH (Cornwall) - September 12, 2022
I have two cracks in my timing side crankcase. I require a replacement casting and preferably a matched pair. It is the casting which houses the earlier type camfollowers.
-
TLS brake commandoWanted - Pardubice (Czech republic) - September 3, 2022
Hello iam looking for TLS brake from commando or John Tickle for my 650 SS Thanks Tomas Tesar
-
auto advance for dominatorWanted - Pardubice (Czech republic) - September 3, 2022
Hello iam looking for autoadvance for my 650 SS Thanks for offers Tomas Tesar
-
Petrol TankWanted - (East Sussex) - September 3, 2022
Metal petrol tank for my 1968 Commando Fastback
-
Commando Race Exhaust SystemWanted - Hexham (Northumberland ) - September 3, 2022
I know it’s a long shot …. But would anyone have a Steve Maney or similar high level race exhaust system for sale for a 750 Commando? If so, please call Mike 07388679378
-
ES2 Wideline Primary ChaincasesWanted - - August 31, 2022
Wanted please? Inner and outer primary chaincases for 1960 alternator wideline ES2. Thanks.
-
ES2 Wideline Engine PlatesWanted - (Cheshire) - August 31, 2022
Wanted please. Engine plates for 1960 ES2 wideline, possibly also headlamp shell and mounts and what have you. Thanks.
-
Damaged Oil tank 1950'sWanted - Bridgwater (South West) - August 30, 2022Bashed or damaged oil tank from late 1940's / early 1950's for Norton ES2, Model 7, Model 18, 16H etc. Must have a good filler neck and be the butterfly locking style cap with a small hinge like the ones in the photo.
-
8" front hub shell for 1953-4 DominatorWanted - London - August 29, 2022
This is the 8" 'half-width' hub as fitted to Dominators and also the International. I do not need the brake plate. Also I need a gear shift lever for a horizontal (aka laydown or Burman) gearbox. It's a larger spline than for AMC.