---

Items per page 30 30 60 90 120 150 page: 1  2  3  4  5  6  7  8  9

Items:0    |    Subtotal:£0.00  Basket

£ 9.95  SS02 E2_8897/8 Screw set : Rocker box : Set of 9 : Stainless steel - Rocker box and inspection cover	£ 30.00  SS08 B3_9111 Cylinder head : Side valve : Including compression plug - 2 fins damaged	£ 3.50  SS05 D4_A2/721 Union : Crankcase oil feed pipes : Pre 1948 engines - Plated : 2 required
£ 7.75  SS00 D6_A2/11 Union : Breather pipe : Magneto/distributor chain drive -	£ 9.50  SS00 D6_A2/10 Breather Pipe : Magneto/distributor chain drive -	£ 0.95  SS00 D6_C2/694 Shim : Camshaft alignment and end float : 0.010 thou thick - Can be used on all post 1948 Singles
£ 2.95  SS10 B1_LU003 Screw : Magneto pick up retaining : Lucas MO1 magnetos - Hexagon head : Set of 2 screws: Genuine Lucas	£ 0.40  SS10 D3_8905 Key : Woodruff : Rocker arm - Fits both ends	£ 5.00  SS10 B1_20045 Washer : Dished : Push rod tube rubbers - Late alloy heads
£ 5.00  SS10 B1_20047 Washer : Plain : Push rod tube rubbers - Late alloy heads	£ 4.00  SS10 B1_A3/69 Spring : Exhaust valve lifter : OHV models : Volute type - Plated	£ 25.50  SS00 D6_C2/112 Sprocket : Mag/dyno : Distributor : 16 teeth - Timing chain : Use with C2/79 sprocket
£ 1.95  SS10 B1_E3798 Bolt : Domed head :Various positions : Plated - Mag platform : Mudguards	£ 5.00  SS10 B1_D3T/110 Stud : Rocker box : Short : 1/4 inch diameter : Alloy heads - Genuine NOS shop soiled : 500T, ES2, Model 18	£ 50.00  SS08 F8_8922 Barrel : Big 4 Enclosed valve springs : +0.060 bore - Top fin broken 2 places : Inc inlet stub : Needs honing or liner
£ 20.00  SS11 G_10262 Flywheel : Bare no shafts : 16H, Model 18, ES2 - Use with 7inch rod E4101	£ 42.25  SS12 B2_A2/32 Main crankshaft bearing : Singles : Not OHC - Roller	£ 35.00  SS08 C1_9033 Bearing : Main : Crankshaft - Ball race type
£ 11.95  SS04 E1_A2/708 Breather pipe : Crankcase breather : Use with nut A2/718 -	£ 3.15  SS10 B1_23034 Stud : Rocker box inspection cover retaining - Screws in rocker shaft	£ 2.30  SS01 D2_A2/118 Locking plate : Magdyno mounting plate - Plated
£ 14.75  SS08 C1_19470 Oil feed pipe : Rocker box - 1956 - 1958	£ 0.23  SS03 E2_E2/995 Gasket : Oil junction block - Single cylinder engines 1950 onwards	£ 0.45  SS03 E3_E3238 Nut : Footrest rod : Plain : Stainless steel - Various positions : Engine plate bolts, crankcases
£ 35.00  SS05 E4_A11/143 Valve : Exhaust : Inter 500 : NOS shop soiled - Head 1.750in dia : Shaft 3/8 in dia : 4.59 in long	£ 22.75  SS00 D6_C2/79 Sprocket : Inlet camshaft : 16 teeth : Keyed - Timing chain : Use with C2/112	£ 22.50  SS01 F2_3780+40 Piston ring set : 82mm +40 : 596cc - Big 4 : 1947/54
£ 20.00  SS08 C1_R3750+20 Piston ring set : Wellworthy Mile Master - 490cc : 79mm + 20 : 1/8th oil ring	£ 3.40  SS10 D2_A3/88 Seal : Push rod tube : Bottom -	£ 1.30  SS03 E3_9185 Circlip : Gudgeon pin : 0.875 inch diameter pin - Seager type

Items per page 30 30 60 90 120 150 page: 1  2  3  4  5  6  7  8  9