Navigation

You are here: Home / Messages / Electrical / Electrex World stator / ignition conversion

Electrex World stator / ignition conversion

Up to Electrical

Electrex World stator / ignition conversion

Posted by chris_rogers1 at April 02. 2017

So i've bitten bullet and decided to remove iffy RITA ignition from my ATLAS, I hope there is a special circle of hell reserved for wiring harness butchers !!

Two questions

One, the new system is -ve earth, old system +ve earth - as all rectifier, coils, zener diode etc are being replaced is there anything left that polarity sensitive, ammeter / horn ?

I've mapped out old wiring and tried to see how to connect in the new system, it looks like the yellow out to lights should connect to black / green to main switch ( was black green rectifier output ), the red out to battery should connect to what was brown/ white to main switch from rectifier ( obviously old zener diode will be removed from this circuit connection ) Now i'm left with a missing connection - old system ran green/ yellow from alternator to main switch - what do i connect to this ?

as you can see not a sparky so need some help, thanks for any advice

Chris

Re: Electrex World stator / ignition conversion

Posted by david_evans at April 03. 2017

Which stator kit have you bought? STK100?

Re: Electrex World stator / ignition conversion

Posted by chris_rogers1 at April 03. 2017

Previously david_evans wrote:

Which stator kit have you bought? STK100?

David STK102D

Powered by Ploneboard
This is Brio Diazo Plone Theme