Navigation

You are here: Home / Messages / Electrical / Wipac Tricon to Triconscul

Wipac Tricon to Triconscul

Up to Electrical

Wipac Tricon to Triconscul

Posted by Ulrich Hoffmann at February 12. 2017

For those of you who own an early Commando like me here is a conversion for the light/horn/ beam switch:

I was lucky to find an original Wipac Triconsul switch whiich was originally mounted on my 1970 Commando.
This switch is not produced as a replica currently, only the Ducon (horn/lights) and Tricon ( horn/lights/kill switch).

 photo IMG_20150430_173356516_zpski2qpvgd.jpg

It has a brown high beam flash knob instead of a green one.
Last week I bought a whole wiring harness from a 70 Commando S on Ebay only the get the orginal green knob switch...
The switch was incomplete but I found the missing high/low beam lever and a new backplate in my electrical spare parts box.

A friend of mine also has a 1970 Commando.
He wants to rebuild it as close to factory stock as possible. At a local swap meet we bought a Wipac Tricon replica switch.
The difference to the Triconsul is both contacts go to ground when pushed. Pushing the red kob is a kill switch for magneto ignition.
The Triconsul has an extra connecting post where the brass strip has contact when pushing the green (or brown) knob which is for the high beam flash.
The black knob is for the horn.

The inside of the two switches:

 photo IMG_20170211_101647180_zps78pyib1q.jpg

On top is the replica base plate , below the original Triconsul plate. The  holes for the extra connector are already there.
The extra connector is seen on top also the brass strip is different.

 photo IMG_20170211_101705165_zpsevrblbhp.jpg

The other side shows the connecting bridge to the high beam connector.

Since I had no surplus connector I used a cable end sleeve in the right diameter for the hole in the base plate.
 photo IMG_20170211_192148715_zpsgeozfqhd.jpg

A suitable screw was driven in for securing the connecting bridge and the brass trip was bent and shortened.

 photo IMG_20170211_192234400_HDR_zpsnnhrzhjx.jpg

This is how the original switch looks from the inside.
 photo IMG_20170211_124755752_zpsch73bnkh.jpg
The red knob was firstly primed and the painted green with Revell enamel paint for  plastic models.

 photo IMG-20170211-WA0002_zpsm6d08zjm.jpeg

 photo IMG-20170211-WA0004_zps87huedv4.jpeg

 photo IMG-20170211-WA0007_zpsbktcvod4.jpeg

The finished Triconsul replica on top and the original below.

 photo IMG_20170211_192850626_zpscwo4lsec.jpg

 photo IMG_20170211_192903511_zpsil5audbo.jpg photo IMG_20170211_192804317_zpshpxutr8x.jpg photo IMG_20170211_192227256_HDR_zpsklhdpvyy.jpg

To open the relpica switch I had to cut off the melted plastic pins.
I drilled holes in the posts and four screws are securing the switch now.



Here is how the cables connect to the switch posts:

 photo IMG_20170211_101336778_zpskklk5tyo.jpg

Happy butchering the switches!

Re: Wipac Tricon to Triconscul

Posted by Fritz Wettstein at February 12. 2017

Thank you Ulrich,

So it should be possible to use it as a flasher-switch too Wink

Fritz

Re: Wipac Tricon to Triconscul

Posted by peter_weait at February 12. 2017

HI Great & informative article just the sort of thing for this site

Re: Wipac Tricon to Triconscul

Posted by john_holmes at February 12. 2017

So it should be possible to use it as a flasher-switch too Wink

 

No, for a flasher you need a 3 position switch, left off and right. This switch has no off position, its either dipped or not dipped.

 

 

Good right up by the way.

Re: Wipac Tricon to Triconscul

Posted by Maurice Turlington at February 12. 2017

I did a similar thing for my Electra. Only I kept the red button and turned it into a electric start button. I was surprised that there was already provision for extra terminals inside the switch. It made me wonder whether they make different types of Tricon switches?

Re: Wipac Tricon to Triconscul

Posted by Fritz Wettstein at February 13. 2017

@Ulrich,

How do you integrate pictures into the text?

Fritz

Re: Wipac Tricon to Triconscul

Posted by Ulrich Hoffmann at February 13. 2017

I found this link:

http://www.nortonownersclub.org/noc-chat/website-suggestions/558634341?b_start=0#193000562

You need a photobucket account and some advanced computer programming knowledge... (Spässle!)

Re: Wipac Tricon to Triconscul

Posted by Ulrich Hoffmann at February 13. 2017

Previously Maurice Turlington wrote:

I did a similar thing for my Electra. Only I kept the red button and turned it into a electric start button. I was surprised that there was already provision for extra terminals inside the switch. It made me wonder whether they make different types of Tricon switches?

To my knowledge ( and search) our far east friends only make Ducon ( horn/lights) and Tricon (horn/lights/kill switch) variants. But you´re right the extra holes for additional posts are already there.

Re: Wipac Tricon to Triconscul

Posted by Fritz Wettstein at February 13. 2017

Previously Ulrich Hoffmann wrote:

You need a photobucket account and some advanced computer programming knowledge... (Spässle!)

OK, that's what I don't like. I'd prefere to copy and paste.

Fritz

BTW. I'm a retired IT-Pro, have been in this business since 1968

Re: Wipac Tricon to Triconscul

Posted by Fritz Wettstein at April 16. 2017

Previously john_holmes wrote:

So it should be possible to use it as a flasher-switch too Wink

 

No, for a flasher you need a 3 position switch, left off and right…


I have this: https://motogadget.com/shop/en/m-stop-bremslichtsteuerung.html as a flasher relay so it should be possible Wink

Fritz

Powered by Ploneboard
Upcoming Events
Brittania Rally - Denmark Aug 18, 2017 - Aug 20, 2017 — Jolly Roger Mc, Nørre Langgade, 8840 Rødkærsbro, Denmark
2017 International Rally Aug 24, 2017 - Aug 28, 2017 — Open Huis, Ieperstraat 157 - 8840 Staden, Belgium
2017 MGP Reunion Aug 29, 2017 03:00 PM - 06:00 PM — The Shore Hotel, Old Laxey Hill Laxey. Isle of Man IM4 7DA
Tay Valley Branch Camping Weekend - Town Yetholm Sep 08, 2017 - Sep 10, 2017
CRMC Track Parade - Anglesey Coastal Sep 09, 2017 - Sep 10, 2017 — A55, Ty Croes, Gwynedd LL63 5TF
Upcoming events…
This is Brio Diazo Plone Theme