Navigation

You are here: Home / Messages / Electrical / Boyer coil mounting

Boyer coil mounting

Up to Electrical

Boyer coil mounting

Posted by robert_tuck at January 17. 2017

I have a double ended coil to fit to the Atlas that came without fixings. The mounts are threaded but I have been unable to match them,not sure if they are 1/4 bsf or1/4 unf ,any idea?.

Re: Boyer coil mounting

Posted by Bob Matthews at January 17. 2017

I take it you have tried threading known bolt sizes into the coil?  I believe that when I fitted one to my BSA, it had metric M6 threads, so maybe that's the problem.

Re: Boyer coil mounting

Posted by richard_evans at January 17. 2017

1/4 UNF are 28 TPI

1/4 BSF are 26 TPI

1/4 Cycle are 26 TPI

Try M6 for a match they are common enough

Re: Boyer coil mounting

Posted by robert_tuck at January 18. 2017

Nope, m6 pass through, may be m7.  Tried about 10 taps so far.I will see if Boyers know .____ Not a thread at all,though it looks like one. through bolts with ally sleeves needed to conduct the heat away to a sink,comes as a kit.If not used expect the coil to expire.

Powered by Ploneboard
Upcoming Events
Norfolk branch camping weekend May 12, 2017 - May 14, 2017 — Whitwell and Reepham railway station, Reepham, Norwich NR10 4GA 01603 871694
CRMC Track Parade - Mallory Park May 20, 2017 - May 21, 2017 — Mallory Park,Church Rd, Kirkby Mallory LE9 7QE
Surrey Branch at the Kempton Park Classic Motorcycle Show & Auto-jumble May 20, 2017 09:30 AM - 04:00 PM — Kempton Park, Staines Road East, Sunbury on Thames, Middlesex TW16 5AQ
Tay Valley Branch - lunch meeting May 21, 2017 11:00 AM - 04:00 PM — Ben Lawers Hotel,Loch Tay, Aberfeldy, Perthshire, PH15 2PA
Yorkshire Branch at the Sowerby Bridge Classic Bike & Scooter Show May 28, 2017 10:30 AM - 04:30 PM — The Wharf, Sowerby Bridge HX6 2AG
Upcoming events…
This is Brio Diazo Plone Theme