Navigation

You are here: Home / Messages / Commando / s+b filter

s+b filter

Up to Commando

s+b filter

Posted by peter_dennett at March 05. 2017

I have been running my mk3 with bellmouths fitted (odd ones so they fit),just fitted a s+b one piece and it run crap,will I need to re jet ? if so any tips on size etc.

ta Pete

Re: s+b filter

Posted by michael_sullivan at March 05. 2017

Logic indicates that you will have to downjet.  Just keep going down in size until it runs correctly.

Re: s+b filter

Posted by richard_payne at March 05. 2017

What jetting and slides are you running at the moment ? Small individual or double filters with a back face close to the carb don't really seem to suit Commandos and make the carbs difficult to tune.

I found that slides with a larger cutaway helped to disguise the lower-mid flatspot but never got rid of it completely.

Do you have 850 cutaway spray tubes with the long needles ? Although fine with the big airbox, They will complicate things too.

Powered by Ploneboard
Upcoming Events
Surrey Branch at the South of England Classic Show Apr 02, 2017 10:00 AM - 05:00 PM — South of England Showground, Ardingly, West Sussex, RH17 6TL
Tay Valley Branch - Huntygowks lunch meeting Apr 02, 2017 11:00 AM - 04:00 PM — Tullybanocher café, Comrie
2017 AGM Apr 02, 2017 11:00 AM - 04:00 PM — Coventry Transport Museum, Millennium Place, Hales St, Coventry CV1 1JD
Prescott Hill Climb & Bike Fest Apr 09, 2017 08:30 AM - 04:30 PM — Bugatti Owners Club, Prescott Hill, Gotherington, Cheltenham, Gloucestershire, GL52 9RD
CRMC Track Parade - Pembrey Apr 15, 2017 - Apr 16, 2017 — Pembrey Circuit Llanelli Carmarthenshire SA16 0HZ
Upcoming events…
This is Brio Diazo Plone Theme