Navigation

You are here: Home / Messages / Light Twins / Navigator kick start

Navigator kick start

Up to Light Twins

Navigator kick start

Posted by stephenjohn_ball at March 29. 2017

Hi not been on the forum recently moved house not had much time for the bike .Need help now went to start it and the kick start spring broke ,stripped it down and sent off for a new spring .I have fitted the new spring and on kicking over the lever stays down .Do I need to pre tension the spring if so how .If I put it in gear the lever completely falls down.

Re: Navigator kick start

Posted by patrick_mullen at March 30. 2017

Which gearbox have you got?  Yes you pre tension the spring certainly on the early gearbox. From memory it is pretty straight forward - the 1959 Maintenance Manual (for the Jubilee) merely says "Fit kickstart return spring to shaft and pull hooked end round to engage hole in casting ".

Powered by Ploneboard
Upcoming Events
Norfolk branch camping weekend May 12, 2017 - May 14, 2017 — Whitwell and Reepham railway station, Reepham, Norwich NR10 4GA 01603 871694
CRMC Track Parade - Mallory Park May 20, 2017 - May 21, 2017 — Mallory Park,Church Rd, Kirkby Mallory LE9 7QE
Surrey Branch at the Kempton Park Classic Motorcycle Show & Auto-jumble May 20, 2017 09:30 AM - 04:00 PM — Kempton Park, Staines Road East, Sunbury on Thames, Middlesex TW16 5AQ
Tay Valley Branch - lunch meeting May 21, 2017 11:00 AM - 04:00 PM — Ben Lawers Hotel,Loch Tay, Aberfeldy, Perthshire, PH15 2PA
Yorkshire Branch at the Sowerby Bridge Classic Bike & Scooter Show May 28, 2017 10:30 AM - 04:30 PM — The Wharf, Sowerby Bridge HX6 2AG
Upcoming events…
This is Brio Diazo Plone Theme