Navigation

You are here: Home / Messages / Heavy Twins / p11 frame photos

p11 frame photos

Up to Heavy Twins

p11 frame photos

Posted by andy_johnson at August 12. 2017

hello ! can anyone help me out with photos of a p11a(68)  frame ? mine has been butchered/welded and i would like to know what i have to do to make it good again with the help of photos .the damage is on  the top rear of the frame.

thanks

andy

Re: p11 frame photos

Posted by colin_steer at August 13. 2017

I have a NOS frame in the loft but it's an early P11 with the rear hoop. Is the damage on yours to the suspension mounts?

Cheers

Colin

Re: p11 frame photos

Posted by peter_palmer at August 14. 2017

Previously andy_johnson wrote:

hello ! can anyone help me out with photos of a p11a(68)  frame ? mine has been butchered/welded and i would like to know what i have to do to make it good again with the help of photos .the damage is on  the top rear of the frame.

thanks

andy

Re: p11 frame photos

Posted by peter_palmer at August 14. 2017

Hi Andy, here are links to two photorgaphs that may help. The first is the early Norton P11 frame that Colin is referring to.  The Second is to a later P11A frame which I think will be the same as yours, hope this helps Pete

http://www.accessnorton.com/the-p11-thread-t14925-165.html

http://www.accessnorton.com/the-p11-thread-t14925-330.html

Re: p11 frame photos

Posted by peter_palmer at August 14. 2017

Andy, meant to add this one for you, should be similar to your frame

Re: p11 frame photos

Posted by dave_ellwood at September 28. 2017
Previously andy_johnson wrote:

hello ! can anyone help me out with photos of a p11a(68)  frame ? mine has been butchered/welded and i would like to know what i have to do to make it good again with the help of photos .the damage is on  the top rear of the frame.

thanks

andy

Hi andy, have some pics of may frame if you still need them Dave
Powered by Ploneboard
This is Brio Diazo Plone Theme