Navigation

You are here: Home / Messages / Heavy Twins / 1950 Norton Model 7 Dominator Bolts/Nuts

1950 Norton Model 7 Dominator Bolts/Nuts

Up to Heavy Twins

1950 Norton Model 7 Dominator Bolts/Nuts

Posted by steven_allen at March 02. 2017

I'm needing a complete set of engine/gearbox mounting bolts for my '50 Norton Model 7. My bike was a basket case when I bought. So, I have no mounting bolts/nuts at all.  Does anybody sell a complete set for my bike?  I've tried Norvil, but getting no response. I live in the USA, so I need to communicate thru email with supplier.  Thanks  Steve

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by richard_evans at March 02. 2017

Andover Norton have a very good reputation and I'm sure they would not ignore you.

Please Google then as I have not mastered the art of attaching a link or pictures on this forum.  (I wish someone would tell me or have some instructions somewhere on the site)

 

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by Skip Brolund at March 02. 2017

Hi Steve,

 

Norton singles & pre-featherbed twins:

 

http://www.manx.co.uk/pdf/MPL-Norton_Singles.pdf

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by steven_allen at March 06. 2017

Previously richard_evans wrote:

Andover Norton have a very good reputation and I'm sure they would not ignore you.

****

Richard--Just received email back from Andover Norton and they don't supply these.. Just to let everybody know..Thanks for your help though.

 

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by richard_evans at March 06. 2017

How disappointing.

 

The absence of responses may indicated they are like hens teeth.

It sounds as though you will either have to go hunting for used parts, check with one of the many suppliers of stainless steel fixings, or get hold of one of the very proficient engineers that exist in the UK who will make them up for you.

 

I came across a knowledgeable classic nuts and bolts man called Tim Kendall who might point you in the right direction sales@groveco.co.uk

Helpful engineering company CPC Engineering

info@cpcengineering.co.uk

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by John Shorter at March 06. 2017

If you manage to contact Les, at Norvil, on a good day, he can be very helpful.  Unfortunately, good days seem to be few!

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by Dan Field at March 06. 2017

You could try contacting these guys unless the ES2 bolts are the same, in which case buy them!

 

http://www.ebay.co.uk/itm/Norton-ES2-Plunger-Engine-Plate-Studs-Nuts-and-Washers-Stainless-Steel-1948-52-/112326242995?hash=item1a272a72b3:m:mGv22CtnAeEYN8cVCXz2weg

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by richard_evans at March 07. 2017

Previously Dan Field wrote:

You could try contacting these guys unless the ES2 bolts are the same, in which case buy them!

 

http://www.ebay.co.uk/itm/Norton-ES2-Plunger-Engine-Plate-Studs-Nuts-and-Washers-Stainless-Steel-1948-52-/112326242995?hash=item1a272a72b3:m:mGv22CtnAeEYN8cVCXz2weg

Good find

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by ian_richtsteig at March 08. 2017

Previously richard_evans wrote:

Previously Dan Field wrote:

You could try contacting these guys unless the ES2 bolts are the same, in which case buy them!

 

http://www.ebay.co.uk/itm/Norton-ES2-Plunger-Engine-Plate-Studs-Nuts-and-Washers-Stainless-Steel-1948-52-/112326242995?hash=item1a272a72b3:m:mGv22CtnAeEYN8cVCXz2weg

Good find

I bought a set of these but the short engine plate-frame mounting bolts were 26TPI and should be 20TPI to screw into the frame.  Check this out before purchasing.

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by david_malcolmson at March 08. 2017

Previously steven_allen wrote:

I'm needing a complete set of engine/gearbox mounting bolts for my '50 Norton Model 7. My bike was a basket case when I bought. So, I have no mounting bolts/nuts at all.  Does anybody sell a complete set for my bike?  I've tried Norvil, but getting no response. I live in the USA, so I need to communicate thru email with supplier.  Thanks  Steve

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by david_malcolmson at March 08. 2017

Previously david_malcolmson wrote:

Previously steven_allen wrote:

I'm needing a complete set of engine/gearbox mounting bolts for my '50 Norton Model 7. My bike was a basket case when I bought. So, I have no mounting bolts/nuts at all.  Does anybody sell a complete set for my bike?  I've tried Norvil, but getting no response. I live in the USA, so I need to communicate thru email with supplier.  Thanks  Steve

Hi, try again! I spoke to Les yesterday afternoon. The secretary (Sue) is very knowledgeable, despite what she might say. Remember the time difference. I have a Model 7...great bike! David....PS look at Norvil website for ordering to get the part number and if in doubt Se or Les will sort you out.

Re: 1950 Norton Model 7 Dominator Bolts/Nuts

Posted by anna jeannette Dixon at March 08. 2017
Previously Skip Brolund wrote:

Hi Steve,

 

Norton singles & pre-featherbed twins:

 

http://www.manx.co.uk/pdf/MPL-Norton_Singles.pdf

Hello well I found that  these Nuts and bolts are not has good has they make out,   I had to replace all my base nuts on my Nortons has they were forever coming undone  even with washers under them, I replaced them with Nooks Nuts   there far better  not had to touch them since   but you pays your money and takes your choice,   yours anna j
Powered by Ploneboard
Upcoming Events
Surrey Branch at the South of England Classic Show Apr 02, 2017 10:00 AM - 05:00 PM — South of England Showground, Ardingly, West Sussex, RH17 6TL
Tay Valley Branch - Huntygowks lunch meeting Apr 02, 2017 11:00 AM - 04:00 PM — Tullybanocher café, Comrie
2017 AGM Apr 02, 2017 11:00 AM - 04:00 PM — Coventry Transport Museum, Millennium Place, Hales St, Coventry CV1 1JD
Prescott Hill Climb & Bike Fest Apr 09, 2017 08:30 AM - 04:30 PM — Bugatti Owners Club, Prescott Hill, Gotherington, Cheltenham, Gloucestershire, GL52 9RD
CRMC Track Parade - Pembrey Apr 15, 2017 - Apr 16, 2017 — Pembrey Circuit Llanelli Carmarthenshire SA16 0HZ
Upcoming events…
This is Brio Diazo Plone Theme