Navigation

You are here: Home / Messages / Singles / 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Up to Singles

1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by emmalouise_stapleton at March 08. 2017

Can anyone advise of where I can get original or replica 1939 Norton Model 50 front and rear mudguards and handlebars?

I am told that a set of 1” handlebars to fit Norton Models 18, 20, 50, possible 16 and CS1 would work. They must be fitted with the mounting brace in the centre.

If anyone is willing to lend me the handlebars (so I can use them as a pattern) I'd be very happy to pay a fee and get you a spare handlebar at the same time. I'm getting pretty desperate to source them!!

Thank you.

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by David Cooper at March 08. 2017

Emmalouise - can't help with sources, sorry, but the bar size is 7/8" with rubber cushioned mounts.  The rubber bushes are available from Jeff and Alan Hunter (they are a very tight squeeze).

I suspect you will have to make up the bracket and braze it on.  That will blue the chrome plate (my old bars are painted black anyway).  Might someone suggest silver solder to avoid this?  I've no idea if that would work, or be safe, or prevent bluing.  Nor do I know the effect of chrome plate on the fixing.

Obviously you need the bracket to stop the bars twisting inside the rubber bushes.

You can see the shape of the bracket on the parts list on Vintagenortondotcom.

Other than that - good luck!

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by Ian MacDougall at March 08. 2017

I have bought handlebars for my CS1, complete with the U clip & bushes, from Stu Rogers. At one time they were available in both 7/8" & 1", with different thickness of bush to suit. Ideally you need the bar & clip unplated so that you can position the bars to suit you and then braze the clip to the bar, followed by plating. Not sure if Stu is still supplying these, his number is 01945 585116. I have a spare set of 7/8" chromed bars in good condition with the clip riveted on (not a good idea). You could use them as a pattern, or you could de-plate, braze the clip and re-plate. Send me a PM if you are interested.

I was able to buy a NOS front guard from Peter Long at Cornucopia (Germany) about 8 years ago. It was scarce (& expensive) back then and will be even harder to find now. I think Peter is winding the business down but it might be worth asking. http://www.cornucopia-enterprises.de/spares-norton.html

Another place to try might be British Only Austria. I don't see anything suitable listed at the moment but it wouldn't do any harm to ask. http://www.vintage-motorcycle.com/

Ian McD

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by emmalouise_stapleton at March 09. 2017

Ian, thank you so much. I've found handlebars and haves some leads that might get me the mudguards. I really appreciate you responding.

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by nicholas_reeves at March 12. 2017

Emmalouise,is there any chance you would be kind enough to tell me the lead you have for getting your mudguards as I need a rear one for my 1935 Es2.Would be most grateful.Thanks Nick.

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by andy_pennell at Saturday 18:15

Previously emmalouise_stapleton wrote:

Can anyone advise of where I can get original or replica 1939 Norton Model 50 front and rear mudguards and handlebars?

I am told that a set of 1” handlebars to fit Norton Models 18, 20, 50, possible 16 and CS1 would work. They must be fitted with the mounting brace in the centre.

If anyone is willing to lend me the handlebars (so I can use them as a pattern) I'd be very happy to pay a fee and get you a spare handlebar at the same time. I'm getting pretty desperate to source them!!

Thank you.

Good afternoon

Did you have any luck getting hold a pair of 1" bars with the brace in the middle please as I also need a pair pretty urgent

Many thanks

Andy

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by andy_pennell at Saturday 18:17

 

Good afternoon

Did you have any luck getting hold a pair of 1" bars with the brace in the middle please as I also need a pair pretty urgent

Many thanks

Andy

Re: 1939 Norton Model 50 Front/Rear Mudguards & Handlebars

Posted by nicholas_clark at Sunday 10:00
Powered by Ploneboard
Upcoming Events
Norfolk branch camping weekend May 12, 2017 - May 14, 2017 — Whitwell and Reepham railway station, Reepham, Norwich NR10 4GA 01603 871694
CRMC Track Parade - Mallory Park May 20, 2017 - May 21, 2017 — Mallory Park,Church Rd, Kirkby Mallory LE9 7QE
Surrey Branch at the Kempton Park Classic Motorcycle Show & Auto-jumble May 20, 2017 09:30 AM - 04:00 PM — Kempton Park, Staines Road East, Sunbury on Thames, Middlesex TW16 5AQ
Tay Valley Branch - lunch meeting May 21, 2017 11:00 AM - 04:00 PM — Ben Lawers Hotel,Loch Tay, Aberfeldy, Perthshire, PH15 2PA
Yorkshire Branch at the Sowerby Bridge Classic Bike & Scooter Show May 28, 2017 10:30 AM - 04:30 PM — The Wharf, Sowerby Bridge HX6 2AG
Upcoming events…
This is Brio Diazo Plone Theme