Navigation

You are here: Home / Messages / Nortons - General / Bike lift ramp.


This message board is a technical forum for Nortons in general. Club related and non-technical items should be put in News and Views and if posted here, will be deleted

Bike lift ramp.

Up to Nortons - General

Bike lift ramp.

Posted by john_dunn1 at April 17. 2017

Noticed there is a lot of messages (last year) on bike lift ramps. To save me trawling through them, does anyone have a preference.

Ive had a look on Ebay. Two caught my eye. I prefer the long bench type. One is the hydraulic lift ramp 450kg which has a scissor action @£349.95. the other is similar, still scissor but has slightly forward facing legs @£299.99.

Thanks

John.

Thanks for your replies.

Its my age related dodgy knees that gave me the idea to purchase one of these lifts. I will also purchase one of those creeper stools, they are only 17.49 plus vat in Machine mart. Will sort the purchase out next week. Today Im getting ready for the classic bike show in Stafford on Sunday.

Thanks John

Re: Bike lift ramp.

Posted by boo_cock at April 17. 2017

I have a seeley ramp about 15 years old now. The newer ones have plastic wheels and only a tread plate pattern top. The plain top is better for cleaning. Put on a rubber mat or carpet to stop sliding about, Best bit of kit I ever got. My knees love me for it.

Re: Bike lift ramp.

Posted by christopher_winsby at April 18. 2017

I use one from machine mart. Got it with the VAT off offer. Used it for a Commando total strip and rebuild. Now six years old and still going strong.

Re: Bike lift ramp.

Posted by jonathan_newton at April 18. 2017

If I didn't have one I probably wouldn't have bikes.  I use mine every run if only to clean and check them over.  For that level of use I'd  recommend the Hydraulic versions. its so simple.  You  can replace the plastic wheels for more robust . Scissor action lifts straight up so less room required.  The  cantilever type need a larger footprint on the floor.

A cut out for a rear wheel drop out is an advantage, I also fitted "eyes" for tie-downs incase I'm getting a  bit enthusiastic with the tighter parts.  If your in a standard residential garage or shed, look for the slimmer versions, they vary depending on capacity.   I have 500 KG and  only 600 mm wide which leaves plenty of room around the machine and also handles the Burgman.

 

Jon

 

Re: Bike lift ramp.

Posted by David Cooper at April 18. 2017

I need one also - but I have two concerns

 

One is simply the room it takes up.  In theory it takes no space since I can always park a bike on it.  But in practice I bet it does not work like that - or does it?

 

The other is that the shed is along a back alleyway - and part of the approach is grass.  I'm not totally convinced that dragging a 150kg lift ramp 50 yards over what amounts to a grassy meadow will be an easy proposition.

Re: Bike lift ramp.

Posted by jonathan_newton at April 18. 2017

Previously David Cooper wrote:

I need one also - but I have two concerns

 

One is simply the room it takes up.  In theory it takes no space since I can always park a bike on it.  But in practice I bet it does not work like that - or does it?

 

The other is that the shed is along a back alleyway - and part of the approach is grass.  I'm not totally convinced that dragging a 150kg lift ramp 50 yards over what amounts to a grassy meadow will be an easy proposition.

If you can get the bike there you can get the ramp there, just a matter of how many of  you.  

The size question is an issue because they do tend to make them like dinning table.  As long as the base is stable the width of the top can be reduced to a certain degree. I went to the trouble of reducing mine by 75mm each side because I kept snagging on the handlebars of the bike alongside.  I don't have a wheel system so I fitted roller balls into the base of mine so I can move it to one side to give me a flexible work space.  I trust your on a solid floor?

To me it is a necessity as kneeling is not an option...

Cheers

Jon 

Re: Bike lift ramp.

Posted by John Sunderland at April 18. 2017

I have a home made lift which is so easy to use and it came as part of the deal when I got my Dommie from my daughters partner. Wouldn't be without it as my knees/back and other joints aint what they used to be

I also have a hydraulic side lift that I bought when I had a Triumph Speedmaster (cruiser). I got it from KD Benches in Falkirk who also make a full ramp/lift. The website is below:

https://kdbenches.co.uk/product/standard-bench/

Re: Bike lift ramp.

Posted by ian_goodhall at April 18. 2017

I've got one of the shorter scissor lifts as in the picture and have been very happy with it. The rear ramp unclips leaving rear wheel in space and easy to remove. To store it I stand it on it's side against the side wall of garage and it takes hardly any space up.

Attachments

Re: Bike lift ramp.

Posted by George Phillips at April 18. 2017
Which make/model is that one Ian? Great bike, BTW. '55 ES2? George

Re: Bike lift ramp.

Posted by ian_goodhall at April 18. 2017

I bought it at some little bike show in Stoke on Trent. I think the people I bought it from advertise in the Old Bike Mart, or they used to. Can't remember their name.

And yes, a '55 ES2. A very enjoyable ride on country roads.

Re: Bike lift ramp.

Posted by john_dunn1 at April 22. 2017

Previously john_dunn1 wrote:

Noticed there is a lot of messages (last year) on bike lift ramps. To save me trawling through them, does anyone have a preference.

Ive had a look on Ebay. Two caught my eye. I prefer the long bench type. One is the hydraulic lift ramp 450kg which has a scissor action @£349.95. the other is similar, still scissor but has slightly forward facing legs @£299.99.

Thanks

John.

Thanks for your replies.

Its my age related dodgy knees that gave me the idea to purchase one of these lifts. I will also purchase one of those creeper stools, they are only 17.49 plus vat in Machine mart. Will sort the purchase out next week. Today Im getting ready for the classic bike show in Stafford on Sunday.

Thanks John

Re: Bike lift ramp.

Posted by Ian Easton at Saturday 21:35

Here's the one I use. It's the best tool I ever bought. If you get one I would advise a big wheel vice at the front, not the little wood type vices, and a dropout at the back for removing wheels.  I trundle mine around the garage with a bike on it and it's not easy - with a bit of help it's fine. On it's own with no bike it's easy to move on a concrete floor.

Attachments

Re: Bike lift ramp.

Posted by George Phillips at Saturday 22:48
Make and cost Ian? George

Re: Bike lift ramp.

Posted by Ian Easton at Saturday 23:43

I can't remember the make as I bought it about 18 years ago and there's no names on it. Back then I paid about $300 for it.

 

 

Re: Bike lift ramp.

Posted by ian_goodhall at Sunday 15:52

Went to Stafford Show yesterday. Were some for sale the same as mine for £290 ish. Here's a link to their website.

http://www.cjautos.eu/product_p/mb03a.htm

 

Ian

Re: Bike lift ramp.

Posted by Barry Carson. at Sunday 18:35

wouldn't mind a full size lift. i had this type as i am restricted for room but its ok for now.

 

 

 

 

Attachments
Powered by Ploneboard

This message board is a technical forum for Nortons in general. Club related and non-technical items should be put in News and Views and if posted here, will be deleted

Upcoming Events
Norfolk branch camping weekend May 12, 2017 - May 14, 2017 — Whitwell and Reepham railway station, Reepham, Norwich NR10 4GA 01603 871694
CRMC Track Parade - Mallory Park May 20, 2017 - May 21, 2017 — Mallory Park,Church Rd, Kirkby Mallory LE9 7QE
Surrey Branch at the Kempton Park Classic Motorcycle Show & Auto-jumble May 20, 2017 09:30 AM - 04:00 PM — Kempton Park, Staines Road East, Sunbury on Thames, Middlesex TW16 5AQ
Tay Valley Branch - lunch meeting May 21, 2017 11:00 AM - 04:00 PM — Ben Lawers Hotel,Loch Tay, Aberfeldy, Perthshire, PH15 2PA
Yorkshire Branch at the Sowerby Bridge Classic Bike & Scooter Show May 28, 2017 10:30 AM - 04:30 PM — The Wharf, Sowerby Bridge HX6 2AG
Upcoming events…
This is Brio Diazo Plone Theme